My Account  |  Cart Contents



Development and prints

Repair service


ars-imago products

Starter Kits

Buoni d'acquisto


New products


  SolarFast Dyes
  SolarFast Film & Marker
  SolarFast Accessory for Screen Printing
  Jacquard Cyanotype

Photographic second hand

Online workshops

LEICA Sofort




Alternative Process

Analog books



Books & Journal

Camera straps




Film Scanner


Filters & Caps




Papers (inkjet)







Solarfast Silk Screens - Aluminum 10" x 14"/25.4 x 35.56 cm - 110 mesh


Price € 25,00
Desired Quantity
Product code ACC1500
Stock 3 pieces en stock


Pre-Stretched Silk Screens

Jacquard’s pre-stretched aluminum screen printing frames are cut and welded by hand and each weld carefully sanded smooth. Watertight, perfectly flat and precisely stretched, the white 110 mesh is evenly taut and adhered to the frame with the most durable glue. Jacquard’s screens are strong and durable yet lightweight and economical, made from top quality 20 mm x 30 mm x 1 mm hollow aluminum-allow stock. The dimensions given (10" x 14" and 12" x 16") are inner dimensions, because when it comes to designing and printing, those are the ones that count!


SolarFast: An Instructional Video from Jacquard Products on Vimeo.


Download the SolarFast Basic Instruction Manual

1. Print your negative onto transparent film using a laser or inkjet printer.

  • For inkjet printing, we recommend using SolarFast™ Film, which is moisture resistant and specially coated to make the best negatives.
  • Higher contrast images work best.
  • Keep in mind that your SolarFast™ print will only be as good as your negative. To achieve truly white highlights on your print, for example, the darkest areas of your negative must be adequately opaque. Hold your negative up to a light source to make sure it is completely blocking light in its densest areas. Depending on your printer, you may need to print two negatives and layer them so the solid black areas are truly opaque. Alternatively, you may want to run the film through the printer a second time or adjust the printer settings to output more ink.

2. Apply SolarFast™ to fabric or heavy artist paper with a brush, sponge or brayer.

  • For hard edges, use masking tape to create a window the size of your image.
  • Coat the print area evenly and completely but don't soak it. You want the dye to be damp, but not overly wet. Blot fabric with a rag or paper towel to remove excess dye before exposing.
  • When printing on a t-shirt or garment place a piece of paper or board between the layers to avoid bleed through.

3. Place your negative, waterproof side down (print side up) directly on the wet surface.

  • The negative must be flush against the wet painted surface.
  • For best results, place a piece of glass or acrylic over the negative.
  • Alternately, you can hold the negative down with tape, pins, magnets or clips—just be sure the negative is pressed flat against the wet painted surface.

4. Expose your coated paper or fabric to sunlight.

5. Wash your print to complete the color development and wash out excess/undeveloped dye.

  • For textiles, machine wash on the hottest setting. Use SolarFast™ Wash for best results.
  • For paper prints, hand wash by submerging in the hottest tap water possible, add SolarFast™ Wash (1-2 capfuls or 10ml), and keep the water flowing for at least 10 minutes.




Visit the Jacquard SolarFast Negative Generator to create your own digital negative to be printed on OHP transparent sheets!


Clients who bought this item also bought ...


Fuji Instax Wide Colorfilm Double pack (20 films) - expired 03/2020
Fuji Instax Wide Colorfilm Double pack (20 films) - expired 03/2020


9"/22.86 cm Squeegee Solarfast
9"/22.86 cm Squeegee Solarfast


Solarfast Silk Screens - Aluminum 12" x 16"/30.48 x 40.64 cm - 110 mesh
Solarfast Silk Screens - Aluminum 12" x 16"/30.48 x 40.64 cm - 110 mesh


Jacquard Solarfast Thickener, 236 ml
Jacquard Solarfast Thickener, 236 ml


Jacquard Solarfast Dye Sepia, 236 ml
Jacquard Solarfast Dye Sepia, 236 ml


Jacquard Solarfast Dye Scarlet, 236 ml
Jacquard Solarfast Dye Scarlet, 236 ml

ars-imago international s.r.l.
Via Caio Mario 25
I-00192 Roma

Fon: +39 06 960 42 253

Opening hours
From Tuesday to Friday:
11.00 - 13.30 / 15.30 - 19.30
11.00 - 15.00
Monday & Sunday:

About us
Business conditions
Privacy & Cookie Policy
Follow us on facebook
Follow us on twitter
Follow us on instagram
Blog (*new*)

Italiano English Deutsch Français

Banco di Brescia
Filiale Roma 6
via Fabio Massimo 15/17
I-00192 Roma



Place of business
ars-imago international s.r.l.
Via Caio Mario 23/25
I-00192 Roma

Nominal capital € 20'000 i.v.
VAT: 10374041001
Codice fiscale: 10374041001
R.E.A. RM – 1228200
Registro delle imprese Roma